DynaVap Vaporizers

DynaVap M *2021* The upgraded version has a slightly larger herbal chamber addition, the bi-metal cap has been improved so that it signals at the optimum time the chamber is at about 190 ° C degrees. The DynaVap Mis a small sensation. This small and handy vaporizer for the host bag is surprisingly efficient and dispenses with complicated technology. Unlike other pen vaporizers, the DynaVap M does a very good job. The Dynavap Mis completely flame-powered and therefore very easy to use. Service 1) Open metal lock and fill Dynavap M2) Close Dynavap Magain3) Apply heat from the side and turn the Dynavap Muntil a clicking sound is heard4) The Dynavap Mis now ready: you can start inhaling materials Materials The DynaVap M is high quality and robust. It is made of medical grade stainless steel. The front cap works as a temperature gauge. So you have constant control when lighting: as soon as the Dynavap Mis sufficiently heated, the clicking sound and you can start with the inhalation. When the Dynavap Mcools down, the clicking sound will sound again. Details: Vaporizer needs no power Simply heat with fire source (ideally jet lighter) Easy to clean Stainless steel, bimetal and silicone gaskets otherwise nothing Scope of Delivery: 1x DynaVap M *2021* - newest version

DynaVap M Plus | M+ Vaporizer  The DynaVap M Plus vaporizer is the improved version of the Dynavap M and the 6th generation of Dynavap M vaporizers. It has a slightly larger herb chamber, an improved surface structure for better grip and also the bi-metal cap has been improved so that it signals at the optimal time that the chamber is at temperature at about 190 ° C degrees. Like its predecessor, the DynaVap M Plus is designed for easy handling. The small and handy Dynavap M+ for the host pocket is efficient and does without complicated technology. In contrast to other pen vaporizers, the Dynavap M Plus does its job very well.   Design The new lamellar-less design of the Dynavap M Plus with increased mass at the base allows for even more efficient and intense extraction of the herb. The Dynavap M Plus absorbs more heat than its predecessor and retains the heat better, allowing complete extraction with only one heat cycle. This is supported by the optimized tip of the Dynvap M Plus. Vaporize an entire bowl with just one heating? now it's possible. The DynaVap M Plus now features a square air connection as well as an improved surface texture for more grip on the shell. Not only does it look sleek, but it significantly improves handling.   Materials  The DynaVap M Plus is made almost entirely of stainless steel, giving it a high quality and robust appearance.   Larger furnace The oven chamber of the Dynavap M Plus is slightly larger than its predecessor and now offers over 12% more volume.   Operation  The front bi-metal cap functions as a temperature gauge. So you have constant control when lighting: as soon as the DynaVap M Plus is sufficiently heated, the click sound is heard and you can start inhaling. After the Dynavap M+ has cooled down, the click sound is heard again and you have to relight. Due to the external heating of the bi-metal cap, the herb inside is vaporized at approx. 190 °C. The time of inhalation and re-firing is signaled by a clicking sound: at the first click you are ready to vaporize, at the second click you have to reheat. It's that simple. The Dynavap M Plus is fully flame powered, making it very easy to use:    1) Remove metal cap/bi-metal cap and fill Dynavap M Plus.    2) Close Dynavap M Plus again.    3) Apply heat from the side and turn the Dynavap M Plus until a click sound is heard.    4) The Dynavap M is now ready for use: you can start inhalation. Application tip: In order to heat up as quickly as possible and to produce as little soot as possible on the cap, please use a jet lighter.   Aromatic or intense vapor Alternatively, the base can now be heated to provide a deeper and more intense extraction in conjunction with the open air opening. For those who prefer gentle and aromatic vapor, heat the M+ near the tip. For a more intense vapor-strong experience and full extraction, heat the Dynavap M+ closer to the base.   Conclusion The Dynavap M+ comes with numerous improvements that enhance the vapor and positively impact the vaporization experience. Like its predecessors, the initially seemingly simple handling requires some practice and skill to create the perfect vapor for yourself. Experimental purists who can do without the comfortable handling of an electric vaporizer will not go wrong with the Dynavap M+.   Details: latest version of Dynavap M series  Square air connection Improved airflow configuration Improved surface structure for more grip Bladeless design with increased mass at the base Extraction with only one heating cycle Approx. 12% larger furnace volume Vaporizer does not require electricity Simply heat with fire source (ideally jet lighter) Easy handling Easy to clean 10mm mouthpiece grind connects to most female 10mm grinds Materials: stainless steel, bi-metal and silicone sealing rings Dimensions: length = approx. 91 mm; diameter = approx. 10 mm Weight: approx. 19.6 grams   Scope of Delivery: 1x DynaVap M Plus Vaporizer - newest version

DynaVap M7 The DynaVap M7 is a premium hand-operated vaporizer designed for dry herb enthusiasts. Its clever design allows for easy handling, which quickly leads to optimal results even for beginners. For experienced users, the M7 offers a wide range of options for customizing the vaporizing experience to personal preferences. In addition, the micro-dosing function with interchangeable herb capsules allows for precise control over herb consumption and stress-free filling, making the M7 particularly flexible and suitable for everyday use. The M vaporizer in a whole new light The DynaVap M7 is a revised version of the classic “M” vaporizer that retains the best features of its predecessor while offering new improvements. The centerless nozzle provides more even heat distribution and improved airflow, resulting in a more intense and consistent herbal extraction. The new textured grip not only provides a stylish design, but also a better hold and optimized heat distribution. Together with the newly designed air hole, the M7 ensures more pleasant and flavorful vaping sessions. Manual Heating System The manual heating technology of the DynaVap M7 gives you full control over your vaping experience. A lighter or an induction heater such as the Ispire Wand can be used to heat the cap to the desired temperature. Depending on where you heat the cap, you can choose between lighter, more aromatic draws and denser, stronger clouds of vapor. The manual heating makes the M7 particularly flexible, as it can be used anywhere, anytime, without batteries or charging. This independence is ideal for on the go or outdoor activities. New design and improved texture The DynaVap M7 boasts a modern design that is not only visually appealing, but also optimizes functionality. The textured stem provides a better grip, and the revised elements such as the air hole allow for more precise control over draw resistance. Made from medical-grade stainless steel, the M7 is robust and durable. Microdosing The Adjust-a-Bowl feature of the DynaVap M7 allows the chamber size to be reduced by 50%, making it ideal for smaller sessions. This feature allows users to enjoy smaller amounts of herb while still ensuring a satisfying vaping experience. How to use the DynaVap M7 Using the DynaVap M7 is straightforward. First, make sure the device is clean and use finely ground herbs. Fill the chamber loosely and place the cap on. Next, heat the cap using a lighter or induction heater until you hear a click and inhale steadily. After the cap has cooled, the session can be continued or ended. Conclusion With the DynaVap M7, you have full control over your vaping experience and can try different techniques to find the best setting for you. Rating: Technology: 7.2 Steam quality: 8.0 Materials: 8.5 Manufacturing quality: 8.6 Functionality: 7.6 Flexibility: 7.2 Handling: 7.8 Mobility: 9.8 Battery life: - Overall rating: 7.8 Details: Heating method: hybrid – convection & conduction Warming up time: 12 seconds Energy source: fire or induction Temperature range: 150°C–230°C Textured stem for a better grip “Adjust-a-bowl” for micro-dosing “Captive Cap” clicks at ideal temperature Made of medical-grade stainless steel Manufacturer: DynaVap Country of manufacture: China Dimensions: 1 x 1 x 9.1 cm Weight: 21 g Scope of delivery: DynaVap M7 vaporizer

DynaVap M7 XL Vaporizer The DynaVap M7 XL is a premium hand-operated vaporizer designed for dry herb enthusiasts. Its clever design allows for easy handling, which quickly leads to optimal results even for beginners. For experienced users, the M7 XL offers a wide range of options for customizing the vaporizing experience to personal preferences. In addition, the micro-dosing function with interchangeable herb capsules allows for precise control over herb consumption and stress-free filling, making the M7 particularly flexible and suitable for everyday use. The M vaporizer in a whole new light The DynaVap M7 XL is a modern evolution of the DynaVap M vaporizer. It takes the proven features of its predecessor and adds innovative improvements that further enhance the vaping experience. One of the main new features is the centerless nozzle, which provides more even heat distribution and improved airflow, resulting in more intense and consistent herb extraction. The newly designed grip also provides a better hold and improves heat dissipation, which, together with the optimized air hole, makes for a more comfortable vaping experience. Manual Heating System The DynaVap M7 XL uses a manual heating system that allows you to fully control the temperature during your vaping session. You can use a lighter or an induction heater like the Ispire Wand to heat the cap to your desired temperature. Depending on where the cap is heated, you can choose between lighter, more aromatic puffs and denser, more powerful clouds of vapor. This manual heating technique makes the M7 XL versatile and independent of batteries or chargers, making it ideal for use on the go or during outdoor activities. Customizable airflow The M7 XL version offers a customizable airflow function that further optimizes the DynaVap experience. The longer mouthpiece and condenser insert allow the airflow to be regulated according to personal preference. With six different settings, you can choose between a tighter draw for more intense flavor or a looser draw for greater vapor production. New design and improved texture The DynaVap M7 XL boasts a sleek, contemporary design that optimizes both aesthetics and functionality. The textured grip provides improved handling, while the redesigned air hole allows for more precise control over draw resistance. Made from high-quality medical-grade stainless steel, the M7 XL is robust and durable, offering a long service life. Microdosing The DynaVap M7's Adjust-a-Bowl feature allows the chamber size to be reduced by 50%, making it ideal for smaller sessions. This function allows users to enjoy smaller amounts of herb while still ensuring a satisfying vaping experience. How to use the DynaVap M7 XL Using the DynaVap M7 XL is straightforward and user-friendly. First, make sure the device is clean and the herbs are finely ground. After filling the chamber and placing the cap, heat it using a lighter or induction heater until you hear a click. You can then inhale slowly and evenly. After the cap has cooled, the session can be continued or ended. The M7 XL allows you to customize your vaping experience by trying different heating methods and puffing speeds. New set with metal transport case and jet flame lighter The Dynavap M7 XL comes with a new robust metal transport case that provides maximum protection when travelling. The set is complemented by a high-quality jet flame lighter that heats the DynaVap reliably and precisely. The new version combines even more convenience with the proven performance of the DynaVap series. Rating: Technology: 7.2 Steam quality: 8.0 Materials: 8.5 Manufacturing quality: 8.6 Functionality: 7.6 Flexibility: 7.2 Handling: 7.8 Mobility: 9.8 Battery life: - Overall rating: 7.8 Details: Heating method: hybrid – convection & conduction Warm-up time: 12 seconds Energy source: fire or induction Temperature range: 150°C - 230°C Textured stem for a better grip “Adjust-a-bowl” for micro-dosing XL version with adjustable airflow “Captive cap” clicks at ideal temperature Made of medical-grade stainless steel Manufacturer: DynaVap Country of manufacture: United States Dimensions: 1 x 1 x 9.1 cm Weight: 21 g Scope of delivery: 1 x Dynavape M7 XL vaporizer 1 x Dynavap jet flame lighter 1 x Dynavap metal transport container

Cuboo Heater Pro V2 Induction Heater The Cuboo Pro V2 Induction Heater is an innovative and efficient solution for heating metal vaporizers such as the DynaVap. This induction heater has been specifically designed to provide a convenient alternative to traditional lighter heating and is characterized by numerous customization options and user-friendly features. Efficient heating and flexible power options The Cuboo Pro V2 offers a heat output of 30 to 60 watts, which can be increased to 70 watts in boost mode. This adjustable output ensures that users can adapt the heating perfectly to their needs. The timer can be set individually between 10 and 60 seconds, allowing precise control of the heating process. The device works with an induction coil that heats the vaporizer quickly and evenly. As soon as the vaporizer (e.g. the DynaVap) is inserted into the heating hole, the process starts automatically and after a few seconds the familiar “click” sound is heard, signaling that the vaporizer is ready for use. Robust design and high-quality materials The Cuboo Pro V2 is not only functional, but also durable. The robust aluminum housing ensures stability and durability, while the magnetic surface under the housing allows the vaporizer to be placed safely. One of the outstanding features is the OLED display, which clearly shows all important information such as the heat output, timer and battery status. Replaceable batteries and USB-C connection The device is powered by two replaceable 18650 Li-Ion batteries (not included). These can either be charged externally or directly in the device via the USB-C port. The USB-C charging function enables fast charging, and the replaceable batteries offer additional flexibility and longevity. One battery charge lasts for around 30 clicks or heating cycles, depending on the settings selected and the ambient temperature. Ease of use and safety features The Cuboo Pro V2 is easy to use: With a simple insertion of the vaporizer into the heating chamber, the timer starts automatically and heating begins. After 10 to 60 seconds, depending on the selected setting, the induction heater switches off automatically for safety reasons. The appliance also has an automatic switch-off function that stops operation after 10 minutes of inactivity to save energy. Another user-friendly feature is the adjustable heating chamber depth, which can be adjusted using an enclosed ceramic screw. This enables even more precise control of the heating surface, ideal for different vaporizer sizes. Conclusion With the Cuboo Pro V2 induction heater, you get an extremely versatile and practical device that makes heating metal vaporizers such as the DynaVap much easier. The combination of flexible heating power, timer setting and robust design makes the Cuboo Pro V2 an ideal choice for users looking for a precise and convenient heating solution. The replaceable batteries and easy USB-C charging offer additional flexibility and longevity. Ideal for vapers who want to customize their sessions efficiently and individually. Details: Power range: 30 to 60 watts (70 watts in boost mode) Timer: Adjustable from 10 to 60 seconds Batteries: 2 x 18650 batteries (not included) Charging connection: USB-C Manufacturer Smiss Technology Country of manufacture: China Weight: 277 g Dimensions: 11 x 6.3 x 2.3 cm Material: Aluminum, ceramic, glass Scope of delivery: 1 x Cuboo Pro V2 induction heater (black) 1 x USB-C charging cable 1 x Replaceable ceramic screw for heating chamber adjustment 1 x Metal screwdriver 1 x Operating instructions (German)

DynaVap M *2021* AquaVape³ Set The upgraded version has a slightly larger herbal chamber addition, the bi-metal cap has been improved so that it signals at the optimum time the chamber is at about 190 ° C degrees. The DynaVap VapCap "M" is a small sensation. This small and handy vaporizer for the host bag is surprisingly efficient and dispenses with complicated technology. Unlike other pen vaporizers, the DynaVap VapCap does a very good job. The VapCap is completely flame-powered and therefore very easy to use. Service 1) Open metal lock and fill VapCap 2) Close VapCap again 3) Apply heat from the side and turn the VapCap until a clicking sound is heard 4) The VapCap is now ready: you can start inhaling materials Materials The DynaVap VapCap "M" is high quality and robust. It is made of medical grade stainless steel. The front cap works as a temperature gauge. So you have constant control when lighting: as soon as the VapCap is sufficiently heated, the clicking sound and you can start with the inhalation. When the VapCap cools down, the clicking sound will sound again. DynaVap VapCap "M" Details: Vaporizer needs no power Simply heat with fire source (ideally jet lighter) Easy to clean Stainless steel, bimetal and silicone gaskets otherwise nothing   AquaVape³ water filter with 14 adapter for DynaVap CAP "M" This accessory is an absolute must-have for all those who want to use their different vaporizers with additional efficiency and greater performance. The water filter is made out of high-quality borosilicate glass. This ensures the vapor is cooler and better for both the throat and lungs.  What benefit does a water filter offer a vaporizer? As the vapor is subject to an additional filtering it is immediately cooled down after generation and further contamination is filtered out. The vapor is far cleaner and fresher ensuring the inhalation is free of contamination.   PLEASE NOTE: Vaporizer are mostly electric appliances. For this reason they must not come into touch with water. Please don't fill in too much water or tilt the water filter too much so that no water leaks! Before putting it on the vaporizer please check if the cut is dry and no water can enter the vaporizer or heating chamber! Improvements of AquaVape³ compared with AquaVape²: Two-piece with cap: easy filling and easier cleaning High quality and thick borosilicate glass Smaller, slimmer and better to handle Optimal amount of water is held and the perk slots are completely covered Nevertheless, no high splash of water ... the mouth stays dry Accurate 14 mm cut (no wobbling)   AquaVape³ Water Filter Details: Height: 125 mm Diameter: 30 mm water filtration a lot of percolators Borosilicate glass / glassware 14er inside cut (14.5 mm) Scope of Delivery: 1x DynaVap Vapcap "M" 2021 1x AquaVape³ water filter made out of lab glass 14" cut 1x DynaVap CAP "M" 14er Adapter (thick mouthpiece)

DynaVap Sieve Set (Set of 3) Ø 8 mm for Herb Chamber DynaVap sieves made of stainless steel. Scope of Delivery: 3x DynaVap sieves made of stainless steel Ø 8 mm