Arizer Air SE Vaporizer

Arizer Air SE Vaporizer "Reefer White" The Arizer Air SE vaporizer is Arizers first budget version and their first entry-level vaporizer. Compared to the other newer models, the Arizer Air SE has been technically reduced a bit and foregoes, for example, a display with temperature setting accurate to the degree and USB-C connection. Instead, the Arizer Air SE offers familiar strengths such as high quality workmanship and tasty vapor. In addition, the Arizer Air SE comes in a very handy size, with a proven ceramic conduction heating technology and allows charging during use (pass through) via its micro USB port. The 5 temperature settings between 180 °C and 210 °C allow the use of a limited range of herbs. The Arizer Air SE is available in "Reefer White" and "Blue Haze" colors.   Easy control of the 5 preset temperature levels The simple one-button operation of the Arizer Air SE allows you to control the device in a flash. The small LED lights, which indicate the respective temperature with the corresponding color, serve as indicators: Blue: 180 °C | 356 °F White: 190 °C | 374 °F Green: 200 °C | 392 °F Orange: 205 °C | 401 °F Red: 210 °C | 410 °F   Proven glass chamber system The proven system, in which the lower part of the mouthpiece functions as a fillable herb chamber, has also been retained in the Air SE. The mouthpiece tube, made of borosilicate glass, is easy to clean. It also allows for efficient heat transfer with as a result, flavorful pure vapor.   Powerful replaceable battery Arizer claims an operating time of 80 minutes on one battery charge, which is considerable. However, the battery can also be replaced in case of need. When the device is turned on, the battery level is briefly displayed.   CONCLUSION The strengths of the Arizer Air SE vaporizer are its high quality, low price, ease of use, replaceable battery, and small size.     Details: Suitable for dried herbs High quality materials Proven ceramic heating technology 5 preset temperature levels Original proven glass chamber system Micro USB with pass-through function Up to 8 uses per charge Small, handy and easy to carry Insulated air path Automatic shut-off Replaceable lithium-ion batteries Available in blue and white   Delivery Scope: 1 x Arizer Air SE Vaporizer *Reefer White* 1 x Li-Ion battery (already in the device)  1 x Micro USB charging cable 1 x Glass mouthpieces (70 mm) 1 x PVC tube with cap (70 mm) 1 x Stainless steel stirring tool 4 x Stainless steel sieves 1 x Multilingual user manual

AquaVape³ water filter with 14er-cut for Arizer Air, Arizer Solo, FocusVape, Crafty (+), Mighty (+), Storm, FlowerMate V5 models and many others (respective adapter is required) This accessory is a must for anyone who wants to use our various vaporizers for added efficiency and performance. The water filter is made of the highest quality borosilicate glass and ensures that the steam is even cooler and therefore better for your neck and lungs. What is the advantage of using a water filter with a vaporizer? Since the steam is additionally filtered, it is cooled down immediately after production and freed from any final impurities. The steam is thus much cleaner and fresher and the inhalation is almost pollutant free. The water filter can be used with the right adapter with many different vaporizers. ATTENTION: Vaporizers are mostly electronic. Therefore, they must not come into contact with water. Please do not add too much water and do not keep the water filter at an angle, so that no water leaks! Before putting on the vaporizer, please check that the cut is dry and that no water can run into the vaporizer or heating chamber! Improvements of the AquaVape³ compared to the AquaVape²: Two-piece with cap: easy filling and easier cleaning High quality and thick borosilicate glass Smaller, slimmer and better to handle Optimal amount of water is held and the perk slots are completely covered Nevertheless, no high splash of water ... the mouth stays dry Accurate 14 mm cut (no wobbling) Details: Height: 125 mm Diameter: 30 mm water filtration a lot of percolators Borosilicate glass / glassware 14er inside cut (14.5 mm) Scope of Delivery: 1x AquaVape³ water filter made of laboratory glass 2 pieces (14er cut, female) Note: To connect to the respective vaporizer, you still need the matching adapter with a 14 mm cut.

Arizer Air MAX / Solo 2 Water Filter Adapter Easy Flow Water Filter Adapter with 14 mm cut including sieve for Arizer Air MAX/ Solo 2. The adapter is required if you would like to use a large water filter(Aquavape) orto connect the vaporizer to the water pipe/bong. Please inserting the adapter pre-heat the heating chamber(stainless steel expands) so it actually fits in. Should the adapter not fit despite the pre-heating then please put it into the freezing compartment of your fridge for a few minutes (glass contracts with coldness). Details : Material: borosilicate glass Scope of Delivery: 1x Easy Flow Water Filter Adapter (14 mm) for Arizer Air MAX / Solo 2 1x Replacement Sieve (already inserted)

Water Filter (AquaVape³ ) Set with 14 mm Adapter made of borosilicate glass ...for Arizer Air MAX / Solo 2 This accessory is a must for anyone who wants to use our various vaporizers for added efficiency and performance. The water filter is made of the highest quality borosilicate glass and ensures that the steam is even cooler and therefore better for your neck and lungs.   What is the advantage of using a water filter with a vaporizer? Since the steam is additionally filtered, it is cooled down immediately after production and freed from any final impurities. The steam is thus much cleaner and fresher and the inhalation is almost pollutant free. The water filter can be used with the right adapter with many different vaporizers. ATTENTION: Vaporizers are mostly electronic. Therefore, they must not come into contact with water. Please do not add too much water and do not keep the water filter at an angle, so that no water leaks! Before putting on the vaporizer, please check that the cut is dry and that no water can run into the vaporizer or heating chamber!   Improvements of the AquaVape³ compared to the AquaVape²: Two-piece with cap: easy filling and easier cleaning High quality and thick borosilicate glass Smaller, slimmer and better to handle Optimal amount of water is held and the perk slots are completely covered Nevertheless, no high splash of water ... the mouth stays dry Accurate 14 mm cut (no wobbling)   Details: Height: 125 mm Diameter: 30 mm water filtration a lot of percolators Borosilicate glass / glassware 14er inside cut (14.5 mm)   Scope of Delivery: 1x AquaVape³ Water Filter made out of lab glass 14" cut 1x Water filter adapter made out of lab glass with 14" cut

Easy Flow Bubbler for Arizer Air Arizer Air MAX/2 / Solo 2 The glass mouthpiece including sieve forArizer Air MAX / Solo 2 Vaporizer. This mouthpiece is used instead of the original mouthpiece and is attached to the vaporizer and filled with water. No additional adapter or water filter are required. It is a must for all those who appreciate cool vapor but still want to have a mobile vaporizer. Please note: The Easy Flow Bubbler is ok. We however recommend theAquaVape² Bubbler instead as it offers greater functionality and better workmanship: Please pre-heat the heating chamber before attaching the mouthpiece(stainless steel expands) ensuring the adapter fits. Should the adapter still not fit despite pre-heating then please put in the freezer for a couple of minutes(glass contracts when exposed to cold). Details: Material: Lab glass Easy Flow Technology for improved airflow Only slightly larger than the original mouthpiece We offer it also as a set (Air/Solo + Bubbler) Scope of Delivery: 1x Easy Flow Water Filter made of lab glass for the Arizer Air MAX / Solo 2 vaporizer

Arizer Air 2 / Solo 2 Glass Aroma Pipe Arizer aroma glass pipe with mouthpiecefor Arizer Air MAX/ Solo 2 Vaporizers. Scope of Delivery: 1x Aroma glass pipe with mouthpiece compatible with Arizer Air MAX / Solo 2

Arizer Air MAX & Solo 2 Aroma Glass Mouthpiece The Arizer Aroma Glass Mouthpiece is the original mouthpiece designed for the Arizer Air MAX and Solo 2 vaporizers. Made from high-quality borosilicate glass, it delivers pure flavor and naturally cools the vapor. Ideal as a spare or additional mouthpiece for home and travel use. Details: Material: Borosilicate Glass Compatible with Arizer Air MAX & Solo 2 Easy to clean Scope of Delivery: 1x Aroma Glass Mouthpiece for Arizer Air MAX & Solo 2

Arizer Air MAX & Solo 2 Easy Flow Mouthpiece 110 mm Easy Flow Mouthpiece for Arizer Air MAX& Solo 2 Vaporizer. With the Easy Flow Mouthpiece yourArizer Air MAX& Solo 2 vaporizer is provided with a considerably better air flow and it restricts the draft resistance. Details: Material: Borosilicate Glass Newest Easy Flow technology Scope of Delivery: 1x Easy Flow Mouthpiece long (110 mm) for Arizer Air MAX & Solo 2

Arizer Arizer Air MAX & Solo 2 Glass Mouthpiece 70mm Glass Mouthpiece incl. sieve for Arizer Air MAX&Solo 2 Vaporizer. Details: Material: Borosilicate Glass Scope of Delivery: 1 x Glass Mouthpiece Short (70 mm) for Arizer Air MAX & Solo 2 Vaporizer

Arizer Solo 2 und Arizer Air MAX Screen Set (6 pcs.) The Arizer Solo II and Arizer Air MAXscreen set provides you with an extended period of screen replacement in your Arizer Solo or Arizer Air portable vaporizer. Delivery Scope: Arizer Solo 2 and Arizer Air MAX Screen Set (6 pieces)

WOLKENKRAFT Herb Leaf Filling Aid Every owner of a vaporizer needs this: the WOLKENKRAFT Herb Leaf filling aid for easy filling of vaporizers. The WOLKENKRAFT Herb Leaf Filling Aid with pusher makes it easy to fill a vaporizer with your favorite herbs. The funnel at the end of the filler is designed to fit snugly into the chamber opening of the vaporizer. Gone are the days of herb residue around the chamber. What often proved difficult in the past is now child's play. Filling a vaporizer with your favorite ground up herbs without anything going astray. Although the filler is flattened at the end to make it easier to pick up the herbs, a small slider is also included to make it even easier to pick up the herbs. Made from 100% natural raw material!  Scope of Delivery: 1x WOLKENKRAFT Herb Leaf Filling Aid with slider

WOLKENKRAFT Non-Alcoholic Cleaning Wipes 6 pcs. in the box Original alcohol-free Wolkenkraft cleaning wipes (6 pieces in the box) for cleaning your vaporizer and accessories. Details: Material-friendly cleaning suitable for all material   Application: Cleaning cloth for head and grow accessories. Universally applicable.   Scope of Delivery: 6x WOLKENKRAFT Cleaning Wipe (alcohol free) in the box

WOLKENKRAFT Ecological Cleaning Brush *Wood/Horsehair* (3 pcs. box) Wolkenkraft Cleaning brush made of wood and natural hair for cleaning the (previously cooled) herbal chamber of the vaporizer.   Scope of Delivery: 3x WOLKENKRAFT Ecological Cleaning Brush for vaporizers

WOLKENKRAFT Premium USB-C Charging Cable With the WOLKENKRAFT Premium USB-C charging cable, the battery of your WOLKENKRAFT vaporizer with USB-C connection (ÄRiS ULTRA, FX MINI ULTRA, ViTA) can be charged at any USB connection. This premium USB-C cable can also be used to transfer data. Scope of Delivery: 1x WOLKENKRAFT Premium USB-C Charging-/Data Cable