Crafty Vaporizer

AquaVape³ Set for Mighty/Mighty+/Crafty/Crafty+ Vaporizer with 14" cut adapter made of pyrex glass This AquaVape³ set comprises of our water filter AquaVape and an adapter with 14" cut which was specially developed for the Crafty+ and the Mighty+ models. This is an affordable option to upgrade your Crafty/Crafty+ or Mighty/Mighty+.   Water filter AquaVape³ Enjoy the pleasure of herbs in a cleaner and purer way when vaporizing! With the water filter the vapor of particles which can pass through the air holes and sieves into the mouth is cleaned. In addition to this the vapor is moistened providing for a greater tolerability for the bronchial tubes. The AquaVape Water Filter is made of robust borosilicate glass.   AquaVape³ Water Filter Adapter With the water filter adapter, every water filter and every 14 mm glass bong can be operated on the original Crafty/Crafty+ or Mighty/Mighty+.   Improvements of the AquaVape³ compared to the AquaVape²: Two-piece with cap: easy filling and easier cleaning High quality and thick borosilicate glass Smaller, slimmer and better to handle Optimal amount of water is held and the perk slots are completely covered Nevertheless, no high splash of water ... the mouth stays dry Accurate 14 mm cut (no wobbling) Details: Height: 125 mm Diameter: 30 mm water filtration a lot of percolators Borosilicate glass / glassware 14er inside cut (14.5 mm)   IMPORTANT NOTES:  Turn the adapter carefully only until a tension is generated and the adapter is firmly seated on the Crafty/Crafty+/Mighty/Mighty+. Overtightening the adapter with too much force can damage your device.  Vaporizers are mostly electronic. Therefore they must not come into contact with water. Please do not fill too much water into the Aquavape and do not hold the bubbler too slanted to prevent water from leaking! Before putting the vaporizer on the vaporizer, please check that the cut is dry and that no water can run into the vaporizer or heating chamber! Scope of Delivery: 1x Laboratory glassware adapter with 14er cut for Mighty/Mighty+/Crafty/Crafty+ 1x AquaVape³ water filter with 14er cut

Dosing Capsules 40 Set The Dosing Capsule Set from Storz & Bickel includes 40 high-quality capsules designed to fit the heating chambers of all Storz & Bickel vaporizer models. They make it easy to pre-fill herbs, store them hygienically, and enjoy convenient use on the go. Details: Diameter: 14 mm Height: 9 mm Two-piece design Material: Aluminum Perfect for pre-dosing and portability Scope of Delivery: 40x Dosing Capsules from Storz & Bickel

Storz & Bickel Dose Capsules 40 Set for Herbs, Oils and Extracts Corresponding dose capsules for heating chambers of all Storz & Bickel Vaporizer models. With the filling assistance from Storz & Bickel it becomes extremely easy to put in capsules. Details: Diameter: 14 mm Height: 9 mm Three parts Made out of aluminum Scope of Delivery: 40x dose capsules from Storz & Bickel Incl. 40 Extract pads

Crafty+ Vaporizer from Storz & Bickel (new model with USB-C) Crafty+ is the new portable vaporizer manufactured by the world famous company Storz & Bickel from Tuttlingen in Germany.Crafty+ combines the established experiences of made with Plenty & Volcano vaporizers over the years in the area of vaporization. For this reasonCraftyis afully developedproduct with the usual quality "Made in Germany".Crafty+ is only equipped with asingle lithium-ion battery as it is weil er sparsam im Stromverbrauch ist. Operation The One-Button functionality ofCrafty+ allows the control only with a single button. TheCrafty+ can be switched on lässt sich per Tastendruck einschalten und heizt automatisch bis zur voreingestellten Basistemperatur von 180°C auf. Durch Doppelklicken schaltet sich der Booster ein und die Temperatur geht hoch auf 195°C. That is signalized through a change of thecontrol LEDfrom red to green and double vibration. Operating mode Similar to Plentyfrom Storz & Bickelalso withCrafty+ the proven combination of air and die bewährte kombinierte Luft- und Strahlungsheizung zum Einsatz. Through the radiation heating it is ensured that with the first puff vapor is generated.The air heating provided for consistent vaporization. Crafty+ Remote Control App With the freeCrafty+ Remote Control App it is possible in line with personal requirements to adjust the base and booster temperature, read the battery charging status and set the vibration and alarm function.TheCrafty+ Remote Control App can be downloaded freefor Android and iOS. Simply scan in the QR Code from the packaging with your smartphone or download in the App Store runterladen (Bluetooth Low Energy (4.0) compatible and tested smartphones see below). Quality made in Germany Crafty+ is thesmallest vaporizerproduced byStorz & Bickela and it once again underlines that the manufacturer has great knowledge developing and manufacturing vaporizers.With the sophisticated cooling systemCrafty+ is able to generate cool vapor and it constantly remains cool from the outside. The sensible functions round off the vaporizer and make it (next to Mighty) one of the best vaporizers to be found on the market.Vaporizersfrom Storz & Bickel waren have never been really cheap. Quality comes at a price. But in respect toCraftythe manufacturer demonstrates that the price is justified. Details: Mobile and independent thanks high-performance battery New & precise electronic control Precise and exact temperature control between 40°C and 210°C Fully heated air flow High performance heating block Vibration alarm Advanced cooling system Switch off automatic after a minute Fold out mouthpiece Measurements 11 x 5.7 x 3.3 cm Weight only 135g Wireless Bluetooth Multipurpose App for Apple and Android Delivery Scope: 1x CRAFTY+ vaporizer - latest version with USB-C 1x Dosage capsule for herbs 6x Replacement sieves (3x normal, 3x coarse) 1x Set of replacement sealing rings (3x) 1x USB-C cable 1x Instruction manual 1x Safety Manual

The Crafty+ Vaporizer Complete Set by Storz & Bickel + Aquavape³ bubbler & 14mm adapter from Vapowelt The Crafty+ is the new portable vaporizer of Storz & Bickel from Tuttlingen in Germany, which became famous worldwide by the Volcano. The Crafty+ combines Storz & Bickel's experience in evaporation with the established vaporizers Plenty & Volcano over many years. Therefore, the Crafty+ is a mature product with the usual quality "Made in Germany". The Crafty+ is powered by only one lithium-ion battery, because it is economical in power consumption. How to use The Crafty+'s one-button feature allows control over just one button. The Crafty+ can be switched on by pressing a button and automatically heats up to the preset base temperature of 180 ° C. By double-clicking the booster turns on and the temperature goes up to 195 ° C. This is signaled by a change of the control LED from red to green and a double vibration.   Functionality Similar to the Plenty from Storz & Bickel, the proven combined air and radiant heating system is also used in the Crafty+. The radiant heating ensures that steam is generated at the very first draft. The air heating ensures a constant evaporation.   Crafty+ Remote Control App With the free Crafty Remote Control App can be customized according to personal needs base and booster temperature, read the state of charge and adjust the vibration and alarm function. The Crafty Remote Control App can be downloaded for free for Android and iOS. Simply scan the QR code from the packaging with the smartphone and download it from the App Store (Bluetooth Low Energy (4.0) compatible and tested smartphones, see below).   Quality made in Germany The Crafty+ is the smallest vaporizer from Storz & Bickel and shows that the manufacturer has a great deal of experience in the construction of vaporizers. Thanks to the sophisticated cooling system, the Crafty+ generates cool steam and always remains cool on the outside. The useful functions round out the vaporizer and make it (next to the Mighty) one of the best vaporizers on the market. The vaporizers from Storz & Bickel were never very cheap. Quality has its price. But even with the Crafty+, the manufacturer proves that the price is absolutely justified. Rating: Technology: 9.1 Steam quality: 8.7 Materials: 8.2 Manufacturing quality: 8.5 Functionality: 8.7 Flexibility: 8.2 Handling: 8.0 Mobility: 8.4 Battery life: 8.3 Overall rating: 8.5   AquaVape³ water filter with 14er-cut This accessory is a must for anyone who wants to use our various vaporizers for added efficiency and performance. The water filter is made of the highest quality borosilicate glass and ensures that the steam is even cooler and therefore better for your neck and lungs.   What is the advantage of using a water filter with a vaporizer? Since the steam is additionally filtered, it is cooled down immediately after production and freed from any final impurities. The steam is thus much cleaner and fresher and the inhalation is almost pollutant free. The water filter can be used with the right adapter with many different vaporizers. ATTENTION: Vaporizers are mostly electronic. Therefore, they must not come into contact with water. Please do not add too much water and do not keep the water filter at an angle, so that no water leaks! Before putting on the vaporizer, please check that the cut is dry and that no water can run into the vaporizer or heating chamber!   Improvements of the AquaVape³ compared to the AquaVape²: Two-piece with cap: easy filling and easier cleaning High quality and thick borosilicate glass Smaller, slimmer and better to handle Optimal amount of water is held and the perk slots are completely covered Nevertheless, no high splash of water ... the mouth stays dry Accurate 14mm cut (no wobbling) IMPORTANT NOTES:  Turn the adapter carefully only until a tension is generated and the adapter is firmly seated on the Crafty/Mighty. Overtightening the adapter with too much force can damage your device.  Vaporizers are mostly electronic. Therefore they must not come into contact with water. Please do not fill too much water into the Aquavape and do not hold the bubbler too slanted to prevent water from leaking! Before putting the vaporizer on the vaporizer, please check that the cut is dry and that no water can run into the vaporizer or heating chamber!   AquaVape³ vaporizer waterfilter Details: Height: 125 mm Diameter: 30 mm water filtration a lot of percolators Borosilicate glass / glassware 14er inside cut (14.5 mm)   Important instructions: Vaporizers are mostly electronic. Therefore, they must not come into contact with water. Please do not fill in too much water and do not keep the water filter at an angle, so that no water runs out! Before putting on the vaporizer, please check that the grinding is dry and that no water can run into the vaporizer or heating chamber!   Crafty+ Complete Set Details: mobile and independent thanks to powerful battery novel & precise electronic control Precise and degree-precise temperature control from 40 ° C - 210 ° C completely heated flow air Hochleistungsheizblock vibrating alert advanced cooling system Automatic switch-off after one minute fold-out mouthpiece Dimensions 11.0 x 5.7 x 3.3 cm Weight only 135g Wireless Bluetooth Multifunction App for Apple and Android   Crafty+ Complete Set + Aquavape³ Bubbler & 14mm Adapter Delivery Scope: 1x CRAFTY+ vaporizer - latest version with USB-C 1x Dosage capsule for herbs 6x Replacement sieves (3x normal, 3x coarse) 1x Set of replacement sealing rings (3x) 1x USB-C cable 1x Instruction manual 1x Safety Manual

AquaVape³ water filter with 14er-cut for Arizer Air, Arizer Solo, FocusVape, Crafty (+), Mighty (+), Storm, FlowerMate V5 models and many others (respective adapter is required) This accessory is a must for anyone who wants to use our various vaporizers for added efficiency and performance. The water filter is made of the highest quality borosilicate glass and ensures that the steam is even cooler and therefore better for your neck and lungs. What is the advantage of using a water filter with a vaporizer? Since the steam is additionally filtered, it is cooled down immediately after production and freed from any final impurities. The steam is thus much cleaner and fresher and the inhalation is almost pollutant free. The water filter can be used with the right adapter with many different vaporizers. ATTENTION: Vaporizers are mostly electronic. Therefore, they must not come into contact with water. Please do not add too much water and do not keep the water filter at an angle, so that no water leaks! Before putting on the vaporizer, please check that the cut is dry and that no water can run into the vaporizer or heating chamber! Improvements of the AquaVape³ compared to the AquaVape²: Two-piece with cap: easy filling and easier cleaning High quality and thick borosilicate glass Smaller, slimmer and better to handle Optimal amount of water is held and the perk slots are completely covered Nevertheless, no high splash of water ... the mouth stays dry Accurate 14 mm cut (no wobbling) Details: Height: 125 mm Diameter: 30 mm water filtration a lot of percolators Borosilicate glass / glassware 14er inside cut (14.5 mm) Scope of Delivery: 1x AquaVape³ water filter made of laboratory glass 2 pieces (14er cut, female) Note: To connect to the respective vaporizer, you still need the matching adapter with a 14 mm cut.

Universal Waterfilter / Bubbler + Hose + Adapter The bubbler is a water filter developed from XVAPE for the XMAX Starry, XVAPE FOG and XVAPE FOG Pro vaporizer to cool and purify the steam for an even better taste experience. The adapter is also suitable for all similar mouthpieces, e.g. from XMAX Starry V3, XVAPE FOG (Pro), FENiX 2.0, Mighty(+), Crafty(+) and many more. Details: entirely made of plastic-coated glass for the mouthpiece   Scope of Delivery: 1x water filter glass attachment (Bubbler Mouthpiece) 2x plastic frame (1x for the bubbler, 1x for the mouthpiece) 1x connecting hose made of silicone

Easy Flow Water Filter Adapter for Mighty/Mighty+/Crafty/Crafty+ with 14" cut made of robust borosilicate glass With the water filter adapter it is possible to operated any water filterwitha 14" cut on a Mighty/Mighty+/Crafty/Crafty+. The corresponding AquaVape² water filter is also available with us - including the set with water filter. IMPORTANT NOTE:Turn the adapter carefully only until a tension is generated and the adapter is firmly seated on the Mighty/Mighty+/Crafty/Crafty+.Overtightening the adapter with too much force can damage your device. Scope of Delivery: 1x Easy Flow Water Filter Adapter made of robust borosilicate glass with 14" cut for Mighty/Mighty+ /Crafty/Crafty+

Mighty/Crafty Screen-Set Ø 15 mm The Mighty/Crafty Sreen-Set contains 6 screenfrom the German manufacturer Storz & Bickelcomprises of6 normal screens. Scope of Delivery: 6x Mighty/Crafty Screens (normal mesh width)  Ø 15 mm

WOLKENKRAFT Herb Leaf Filling Aid Every owner of a vaporizer needs this: the WOLKENKRAFT Herb Leaf filling aid for easy filling of vaporizers. The WOLKENKRAFT Herb Leaf Filling Aid with pusher makes it easy to fill a vaporizer with your favorite herbs. The funnel at the end of the filler is designed to fit snugly into the chamber opening of the vaporizer. Gone are the days of herb residue around the chamber. What often proved difficult in the past is now child's play. Filling a vaporizer with your favorite ground up herbs without anything going astray. Although the filler is flattened at the end to make it easier to pick up the herbs, a small slider is also included to make it even easier to pick up the herbs. Made from 100% natural raw material!  Scope of Delivery: 1x WOLKENKRAFT Herb Leaf Filling Aid with slider

WOLKENKRAFT Non-Alcoholic Cleaning Wipes 6 pcs. in the box Original alcohol-free Wolkenkraft cleaning wipes (6 pieces in the box) for cleaning your vaporizer and accessories. Details: Material-friendly cleaning suitable for all material   Application: Cleaning cloth for head and grow accessories. Universally applicable.   Scope of Delivery: 6x WOLKENKRAFT Cleaning Wipe (alcohol free) in the box

WOLKENKRAFT Ecological Cleaning Brush *Wood/Horsehair* (3 pcs. box) Wolkenkraft Cleaning brush made of wood and natural hair for cleaning the (previously cooled) herbal chamber of the vaporizer.   Scope of Delivery: 3x WOLKENKRAFT Ecological Cleaning Brush for vaporizers

WOLKENKRAFT Micro USB Charging Cable The WOLKENKRAFT Micro USB Charging Cable allows you to easily recharge your vaporizer’s battery via any USB port – whether connected to a computer, a wall adapter, or a power bank. Compact and reliable, it is perfect for daily use and travel. Details: Micro USB connector cable Length: approx. 500 mm Lightweight and easy to carry Compatible with many vaporizers and devices Scope of Delivery: 1x WOLKENKRAFT Micro USB Charging Cable