DynaVap M Plus Vaporizer

AquaVape³ water filter with 14 adapter for DynaVap CAP "M" This accessory is an absolute must-have for all those who want to use their different vaporizers with additional efficiency and greater performance. The water filter is made out of high-quality borosilicate glass. This ensures the vapor is cooler and better for both the throat and lungs.    What benefit does a water filter offer a vaporizer? As the vapor is subject to an additional filtering it is immediately cooled down after generation and further contamination is filtered out. The vapor is far cleaner and fresher ensuring the inhalation is free of contamination.   PLEASE NOTE: Vaporizer are mostly electric appliances. For this reason they must not come into touch with water. Please don't fill in too much water or tilt the water filter too much so that no water leaks! Before putting it on the vaporizer please check if the cut is dry and no water can enter the vaporizer or heating chamber!   Improvements of AquaVape³ compared with AquaVape²: Two-piece with cap: easy filling and easier cleaning High quality and thick borosilicate glass Smaller, slimmer and better to handle Optimal amount of water is held and the perk slots are completely covered Nevertheless, no high splash of water ... the mouth stays dry Accurate 14 mm cut (no wobbling)   Details: Height: 125 mm Diameter: 30 mm water filtration a lot of percolators Borosilicate glass / glassware 14er inside cut (14.5 mm)     Scope of Delivery: 1x AquaVape³ water filter made out of lab glass 14" cut 1x DynaVap M and M Plus 14er Adapter (thick mouthpiece)

Cuboo Heater Pro V2 Replacement Glass The Cuboo Heater Pro V2 replacement glass is suitable for replacing worn glass in the Cuboo Heater Pro V2 induction heater. The old glass can simply be pulled out of the Cuboo Heater and the new one inserted into the Cuboo Heater Pro V2. Scope of delivery: 1 x Cuboo Heater Pro V2 replacement glass

DynaVap M Plus | M+ Vaporizer  The DynaVap M Plus vaporizer is the improved version of the Dynavap M and the 6th generation of Dynavap M vaporizers. It has a slightly larger herb chamber, an improved surface structure for better grip and also the bi-metal cap has been improved so that it signals at the optimal time that the chamber is at temperature at about 190 ° C degrees. Like its predecessor, the DynaVap M Plus is designed for easy handling. The small and handy Dynavap M+ for the host pocket is efficient and does without complicated technology. In contrast to other pen vaporizers, the Dynavap M Plus does its job very well.   Design The new lamellar-less design of the Dynavap M Plus with increased mass at the base allows for even more efficient and intense extraction of the herb. The Dynavap M Plus absorbs more heat than its predecessor and retains the heat better, allowing complete extraction with only one heat cycle. This is supported by the optimized tip of the Dynvap M Plus. Vaporize an entire bowl with just one heating? now it's possible. The DynaVap M Plus now features a square air connection as well as an improved surface texture for more grip on the shell. Not only does it look sleek, but it significantly improves handling.   Materials  The DynaVap M Plus is made almost entirely of stainless steel, giving it a high quality and robust appearance.   Larger furnace The oven chamber of the Dynavap M Plus is slightly larger than its predecessor and now offers over 12% more volume.   Operation  The front bi-metal cap functions as a temperature gauge. So you have constant control when lighting: as soon as the DynaVap M Plus is sufficiently heated, the click sound is heard and you can start inhaling. After the Dynavap M+ has cooled down, the click sound is heard again and you have to relight. Due to the external heating of the bi-metal cap, the herb inside is vaporized at approx. 190 °C. The time of inhalation and re-firing is signaled by a clicking sound: at the first click you are ready to vaporize, at the second click you have to reheat. It's that simple. The Dynavap M Plus is fully flame powered, making it very easy to use:    1) Remove metal cap/bi-metal cap and fill Dynavap M Plus.    2) Close Dynavap M Plus again.    3) Apply heat from the side and turn the Dynavap M Plus until a click sound is heard.    4) The Dynavap M is now ready for use: you can start inhalation. Application tip: In order to heat up as quickly as possible and to produce as little soot as possible on the cap, please use a jet lighter.   Aromatic or intense vapor Alternatively, the base can now be heated to provide a deeper and more intense extraction in conjunction with the open air opening. For those who prefer gentle and aromatic vapor, heat the M+ near the tip. For a more intense vapor-strong experience and full extraction, heat the Dynavap M+ closer to the base.   Conclusion The Dynavap M+ comes with numerous improvements that enhance the vapor and positively impact the vaporization experience. Like its predecessors, the initially seemingly simple handling requires some practice and skill to create the perfect vapor for yourself. Experimental purists who can do without the comfortable handling of an electric vaporizer will not go wrong with the Dynavap M+.   Details: latest version of Dynavap M series  Square air connection Improved airflow configuration Improved surface structure for more grip Bladeless design with increased mass at the base Extraction with only one heating cycle Approx. 12% larger furnace volume Vaporizer does not require electricity Simply heat with fire source (ideally jet lighter) Easy handling Easy to clean 10mm mouthpiece grind connects to most female 10mm grinds Materials: stainless steel, bi-metal and silicone sealing rings Dimensions: length = approx. 91 mm; diameter = approx. 10 mm Weight: approx. 19.6 grams   Scope of Delivery: 1x DynaVap M Plus Vaporizer - newest version

Cuboo Heater Pro V2 Induction Heater The Cuboo Pro V2 Induction Heater is an innovative and efficient solution for heating metal vaporizers such as the DynaVap. This induction heater has been specifically designed to provide a convenient alternative to traditional lighter heating and is characterized by numerous customization options and user-friendly features. Efficient heating and flexible power options The Cuboo Pro V2 offers a heat output of 30 to 60 watts, which can be increased to 70 watts in boost mode. This adjustable output ensures that users can adapt the heating perfectly to their needs. The timer can be set individually between 10 and 60 seconds, allowing precise control of the heating process. The device works with an induction coil that heats the vaporizer quickly and evenly. As soon as the vaporizer (e.g. the DynaVap) is inserted into the heating hole, the process starts automatically and after a few seconds the familiar “click” sound is heard, signaling that the vaporizer is ready for use. Robust design and high-quality materials The Cuboo Pro V2 is not only functional, but also durable. The robust aluminum housing ensures stability and durability, while the magnetic surface under the housing allows the vaporizer to be placed safely. One of the outstanding features is the OLED display, which clearly shows all important information such as the heat output, timer and battery status. Replaceable batteries and USB-C connection The device is powered by two replaceable 18650 Li-Ion batteries (not included). These can either be charged externally or directly in the device via the USB-C port. The USB-C charging function enables fast charging, and the replaceable batteries offer additional flexibility and longevity. One battery charge lasts for around 30 clicks or heating cycles, depending on the settings selected and the ambient temperature. Ease of use and safety features The Cuboo Pro V2 is easy to use: With a simple insertion of the vaporizer into the heating chamber, the timer starts automatically and heating begins. After 10 to 60 seconds, depending on the selected setting, the induction heater switches off automatically for safety reasons. The appliance also has an automatic switch-off function that stops operation after 10 minutes of inactivity to save energy. Another user-friendly feature is the adjustable heating chamber depth, which can be adjusted using an enclosed ceramic screw. This enables even more precise control of the heating surface, ideal for different vaporizer sizes. Conclusion With the Cuboo Pro V2 induction heater, you get an extremely versatile and practical device that makes heating metal vaporizers such as the DynaVap much easier. The combination of flexible heating power, timer setting and robust design makes the Cuboo Pro V2 an ideal choice for users looking for a precise and convenient heating solution. The replaceable batteries and easy USB-C charging offer additional flexibility and longevity. Ideal for vapers who want to customize their sessions efficiently and individually. Details: Power range: 30 to 60 watts (70 watts in boost mode) Timer: Adjustable from 10 to 60 seconds Batteries: 2 x 18650 batteries (not included) Charging connection: USB-C Manufacturer Smiss Technology Country of manufacture: China Weight: 277 g Dimensions: 11 x 6.3 x 2.3 cm Material: Aluminum, ceramic, glass Scope of delivery: 1 x Cuboo Pro V2 induction heater (black) 1 x USB-C charging cable 1 x Replaceable ceramic screw for heating chamber adjustment 1 x Metal screwdriver 1 x Operating instructions (German)

AquaVape³ water filter with 14er-cut for Arizer Air, Arizer Solo, FocusVape, Crafty (+), Mighty (+), Storm, FlowerMate V5 models and many others (respective adapter is required) This accessory is a must for anyone who wants to use our various vaporizers for added efficiency and performance. The water filter is made of the highest quality borosilicate glass and ensures that the steam is even cooler and therefore better for your neck and lungs. What is the advantage of using a water filter with a vaporizer? Since the steam is additionally filtered, it is cooled down immediately after production and freed from any final impurities. The steam is thus much cleaner and fresher and the inhalation is almost pollutant free. The water filter can be used with the right adapter with many different vaporizers. ATTENTION: Vaporizers are mostly electronic. Therefore, they must not come into contact with water. Please do not add too much water and do not keep the water filter at an angle, so that no water leaks! Before putting on the vaporizer, please check that the cut is dry and that no water can run into the vaporizer or heating chamber! Improvements of the AquaVape³ compared to the AquaVape²: Two-piece with cap: easy filling and easier cleaning High quality and thick borosilicate glass Smaller, slimmer and better to handle Optimal amount of water is held and the perk slots are completely covered Nevertheless, no high splash of water ... the mouth stays dry Accurate 14 mm cut (no wobbling) Details: Height: 125 mm Diameter: 30 mm water filtration a lot of percolators Borosilicate glass / glassware 14er inside cut (14.5 mm) Scope of Delivery: 1x AquaVape³ water filter made of laboratory glass 2 pieces (14er cut, female) Note: To connect to the respective vaporizer, you still need the matching adapter with a 14 mm cut.

DynaVap Sieve Set (Set of 3) Ø 8 mm for Herb Chamber DynaVap sieves made of stainless steel. Scope of Delivery: 3x DynaVap sieves made of stainless steel Ø 8 mm

WOLKENKRAFT Herb Leaf Filling Aid Every owner of a vaporizer needs this: the WOLKENKRAFT Herb Leaf filling aid for easy filling of vaporizers. The WOLKENKRAFT Herb Leaf Filling Aid with pusher makes it easy to fill a vaporizer with your favorite herbs. The funnel at the end of the filler is designed to fit snugly into the chamber opening of the vaporizer. Gone are the days of herb residue around the chamber. What often proved difficult in the past is now child's play. Filling a vaporizer with your favorite ground up herbs without anything going astray. Although the filler is flattened at the end to make it easier to pick up the herbs, a small slider is also included to make it even easier to pick up the herbs. Made from 100% natural raw material!  Scope of Delivery: 1x WOLKENKRAFT Herb Leaf Filling Aid with slider

WOLKENKRAFT Non-Alcoholic Cleaning Wipes 6 pcs. in the box Original alcohol-free Wolkenkraft cleaning wipes (6 pieces in the box) for cleaning your vaporizer and accessories. Details: Material-friendly cleaning suitable for all material   Application: Cleaning cloth for head and grow accessories. Universally applicable.   Scope of Delivery: 6x WOLKENKRAFT Cleaning Wipe (alcohol free) in the box

WOLKENKRAFT Ecological Cleaning Brush *Wood/Horsehair* (3 pcs. box) Wolkenkraft Cleaning brush made of wood and natural hair for cleaning the (previously cooled) herbal chamber of the vaporizer.   Scope of Delivery: 3x WOLKENKRAFT Ecological Cleaning Brush for vaporizers